KME CUSTOM CHASSIS 2003: STEERING:LINKAGES:TIE ROD ASSEMBLY
| Make : KME | Model : CUSTOM CHASSIS | Year : 2003 |
| Build Dates : 1996-05-14 - 2004-05-15 | ||
| NHTSA CAMPAIGN ID Number : 03V380000 | ||
| Date Owner's Notified: 2003-11-07 | Date Received by ODI: 2003-10-08 | Date Added to Database: 2003-10-20 |
| Manufacturers Involved: Pierce Manufacturing | ||
| Manufacturer's Responsible for the Recall: | ||
| Manufacturer Campaign Number: | ||
| Component: STEERING:LINKAGES:TIE ROD ASSEMBLY | ||
| Potential Number Of Units Affected : 202 | ||
|
Summary:
ON CERTAIN FIRE TRUCKS WITH TANDEM STEER AXLES. THE TRW TIE-ROD ON THE REAR-MOST AXLE OF A TANDEM AXLE IS RESTRAINED FROM ROTATIONAL MOVEMENT BY A PAIR OF ANTI-ROTATION SEALS LOCATED AT THE BALL SOCKET JOINTS. THESE ANTI-ROTATION SEALS WILL COMPRESS OVER TIME. IF THE ANTI-ROTATION SEAL ALLOWS TOO MUCH MOTION, THE SEALS CAN DETERIORATE, ALLOWING CONTACT BETWEEN THE BALL SOCKET AND THE BALL SHAFT. THIS METAL-TO-METAL CONTACT WILL TRANSMIT FORCES INTO THE TIE-ROD TUBE, CAUSING FATIGUE FAILURE INITIATING AT THE ROOT OF THE FEMALE TREADS. |
||
|
Consequence:
FAILURE OF THE TIE-ROD WILL ALLOW ONE OF THE WHEELS TO SWING TO THE LIMIT OF ITS STEERING STOP, POTENTIALLY CAUSING A LOSS OF VEHICLE CONTROL, INCREASING THE RISK OF A CRASH. |
||
|
Remedy:
DEALERS WILL REPLACE THE TIE ROD. NOTIFICATION TO OWNERS BEGAN NOVEMBER 7, 2003. OWNERS SHOULD CONTACT PIERCE AT 1-888-974-3723. |
||
| Report Initiator: MFR | V Report | |
| Regulation Part Number: | Federal Motor Vehicle Safety Standard Number: | |
|
Notes:
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT '1-888-327-4236'. |
||
