JEEP GRAND CHEROKEE 1993: STEERING: STEERING WHEEL/HANDLE BAR

General Information

NHTSA Campaign ID Number: 93V210000

Make Model Year
JEEP GRAND CHEROKEE 1993
Date Owners Notified Date Received by ODI Date Added to Database
1994-01-25 1993-12-13 1993-12-30

Production Dates: 1992-06-01 - 1998-05-31

Manufacturers Involved: Chrysler (FCA US, LLC)

Component: STEERING: STEERING WHEEL/HANDLE BAR

Potential Number Of Units Affected: 115000

Report Initiator: ODI ODI Report

Summary

THE MOLDED PLASTIC PIN WHICH CONNECTS THE UPPER STEERING COLUMN SHAFT AND THE LOWER COLUMN SHAFT MAY HAVE BEEN SHEARED PRIOR TO INSTALLATION OF THE STEERING COLUMN ASSEMBLY INTO THE VEHICLE. IF THIS OCCURRED, THE UPPER STEERING SHAFT WILL SEPARATE FROM THE LOWER STEERING SHAFT.

Consequence

IF THE UPPER AND LOWER STEERING SHAFTS SEPARATE, COMPLETELOSS OF STEERING CONTROL WILL OCCUR, WHICH COULD RESULT IN AN ACCIDENT.

Remedy

A RESTRAINING SLEEVE WILL BE ADDED TO THE INTERMEDIATE SHAFT TO LIMIT THE AMOUNT OF STEERING SHAFT MOVEMENT AVAILABLE.

Notes

SYSTEM: STEERING; COLUMN SHAFT; UPPER.VEHICLE DESCRIPTION: MULTIPURPOSE PASSENGER VEHICLES.NOTE: IF YOU HAVE A PROBLEM OBTAINING THE NEEDED REPAIR, PLEASE CONTACT THECHRYSLER ZONE OFFICE IN YOUR AREA. IT IS LISTED UNDER "SERVICE ASSISTANCE" INYOUR OWNER'S MANUAL. A ZONE REPRESENTATIVE WILL ARRANGE FOR PROMPT ATTENTION TOYOUR VEHICLE. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'SAUTO SAFETY HOTLINE AT 1-800-424-9393.