FORD F350 1991: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS

Make : FORD Model : F350 Year : 1991
Build Dates : 1987-08-01 - 1991-08-01
NHTSA CAMPAIGN ID Number : 92V026000
Date Owner's Notified: 1992-06-10 Date Received by ODI: 1992-03-03 Date Added to Database: 1992-03-11
Manufacturers Involved: Ford Motor Company
Manufacturer's Responsible for the Recall:
Manufacturer Campaign Number:
Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS
Potential Number Of Units Affected : 467000
Summary:
      A REVISED BRAKE LINING NOISE INSULATOR RESULTED IN A DECREASE IN THE THERMAL INSULATION BETWEEN THE BRAKE LINING AND THE FRONT BRAKE CALIPER PISTON. THIS CAUSED GREATER HEAT TRANSFER TO THE CALIPER PISTONS WITH THE POTENTIAL TO OVERHEAT THE BRAKE FLUID AND DIMINISH BRAKE EFFECTIVENESS DURING SEVERE BRAKING CONDITIONS.
Consequence:
      INCREASED STOPPING DISTANCES AND INABLILITY TO HOLDVEHICLES ON A STEEP GRADE RESULTS IN INCREASED RISK OF ACCIDENT IN THE EVENT OFA SUDDEN STOP OR WHEN CONSTANT BRAKING IS NEEDED TO MANEUVER THROUGH AREAS WITHSTEEP GRADES.
Remedy:
      ADD SNAP-IN INSULATORS THAT ATTACH TO EACH OF THE FRONT BRAKE CALIPER PISTONS. IN ADDITION, VEHICLES WITH 7.5 L ENGINES WILL HAVE INSULATION ADDED TO THE ENGINE COMPARTMENT BRAKE LINES.
Report Initiator: ODI V Report
Regulation Part Number: Federal Motor Vehicle Safety Standard Number:
Notes:
      SYSTEM: BRAKES; FRONT BRAKE LINING.VEHICLE DESCRIPTION: F250 AND F350 TRUCKS WITH 7.3 L DIESEL AND 7.5 L EFIENGINES ; F250 AND F350 4X4 MODELS WITH 5.8 L EFI ENGINES.NOTE: FORD RECOMMENDS VEHICLE OPERATORS DO NOT EXCEED THE GCWR AND GVWR OF THEIRVEHICLES, AND PROPER MAINTENANCE OF THE BRAKES ON THESE VEHICLES AND ANY TRAILERPARTICULARLY WHEN OPERATING IN MOUNTAINOUS AREAS WITH LONG, STEEP GRADES.